TTR Wax Ribbon for Printing on Label (YD-100 Wax)

TTR Wax Ribbon for Printing on Label (YD-100 Wax)

Thermal transfer ribbon FOR Avery Dennison / Novexx Solutions comes in various forms including wax, wax/resin or resin, depending on your necessity. Its areas of application include storage, shipping, logistics, signs and logos, and direct food contact.


We aim to create much more worth for our buyers with our abundant resources, highly developed machinery, experienced workers and great providers for Color Resin Ribbon, Datamax Compatible Thermal Transfer Wax/Resin Ribbon, Wax Ribbon. With the development of science and technology, products are updated faster and faster, and we find that consumers have higher and higher requirements for product individuation, quality and delivery. We deeply know that "product quality is the foundation of an enterprise" is not only a spirit, but also a responsibility. We have established a complete after-sales service system to provide guidance and assistance for the problems and difficulties encountered in the development of the enterprise.

Thermal transfer ribbon FOR Avery Dennison / Novexx Solutions comes in various forms including wax, wax/resin or resin, depending on your necessity. Its areas of application include storage, shipping, logistics, signs and logos, and direct food contact. It is also applicable for medical stuff such as cosmetics, health, and pharmaceuticals. The longest available ribbon on the market is up to 1400 m long that will help you minimize production down-time. It is the best thermal transfer ribbon that is well suited to your budget.

Thermal Transfer ribbon Resin is specially designed ribbon with excellent resistance. Provide high quality print result with the highest levels of resistance to abrasion, heat 300°C (on polyamide filmm), steam and various chemicals including gasoline, engine oil, bleach, antifreeze, mineral spirits and sulphuric acid. Resin ribbon is offering very good printing quality on wide scale of plastic and textile materials and is possible to choose from wide range already slitted rolls for different types of thermal transfer printers with flat head. We have Resin Ribbon which is suitable for printers with flat head which are for example: Avery Dennison, Zebra, Datamax, Sato, Intermec, Citizen and so on.

Ribbon Type




Avery Compatible Resin Ribbon

Excellent durability


Shelf Labeling

Excellent versatility

Polyimide films

Product Labeling

Excellent printing image



Low printing energy level required

Top coated and print-treated polyester


Widely used in variety of substrates



High speed printing





Asset tracking

Electronic component


Images of Avery Dennison Ink Ribbon

Frequently Asked Questions Avery-Dennison Printers

1. My printer has stopped running, and is showing error code 5000 Bus Device Error. How can I fix this problem?

This error indicates that one of the devices attached to the I2C bus (the M4A motor driver board) is not responding. The error needs to be acknowledged by pressing the ONLINE key, after which the following things should be checked:

Determine if any additional error messages follow, and acknowledge them where required. [See Secondary and Tertiary Indicators below.]

Turn the printer off, and allow it to sit idle for at least 30 seconds.

If the error recurs on power up, re-acknowledge any cascading errors as in step 1, then check peripheral device settings under System Parameters. Reset to the proper configuration, and allow the printer to re-initialize.

After re-setting the peripherals or any other menu elements, turn the printer off again. Let the printer sit idle for at least 30 seconds, and then turn it back on. The printer should initialize normally.

NOTE: A persistent bus device error is indicative of either attempting to run the printer with incorrect settings, trying to override sensors, or failure of one of the M4A peripheral device boards.


Acknowledgement of the bus device error will generally produce a secondary error—either 5005, 5006, or 5008. These errors indicate that the associated device is not connected to its peripheral board, or may indicate a problem on the board itself. The secondary error must be acknowledged by pressing the ONLINE key. [For further details on these errors, see the specific notes below on errors 5005, 5006, and 5008.]


If one of the secondary errors occurs, acknowledgement of it may result in a third error, which will always be in the group 5020-5025. These errors provide more specific information about the source of the original bus device error by indicating the device ID for the particular fault. For a summary of the device ID's, see details on errors 5020 through 5025.

With the honest corporate philosophy and the excellent quality of our TTR Wax Ribbon for Printing on Label (YD-100 Wax), we have established a good reputation in the industry and gained praise and trust from the majority of customers. We use high-precision advanced production equipment, and every link in the manufacturing process has undergone strict quality management. Our company always attaches importance to the cultivation of talents, and after years of hard work, we have formed a pragmatic and perfect corporate culture.
Hot Tags: resin ribbon for avery printer, China, manufacturers, suppliers, factory, customized, price, zebra 5095, 02300gs06407, Zebra 5555 Standard Wax-Resin, Resin Thermal Transfer Ribbon, Tamper Evident Labels For Boxes, brother label printer tape

Send Inquiry