info@kuanlang.net +86-592-2053933
TTR Label Printing Ribbon (YD100)

TTR Label Printing Ribbon (YD100)

Thermal transfer ribbon FOR Avery Dennison / Novexx Solutions comes in various forms including wax, wax/resin or resin, depending on your necessity. Its areas of application include storage, shipping, logistics, signs and logos, and direct food contact.

Description

Our company's independent research and development TSC Barcode Printer Ribbon, dymo 11354, 02300GS11007 have attracted much attention and praise all over the world. The products are exported to many countries and regions and are deeply loved by consumers at home and abroad. Based on the creed of 'sincerity-oriented, trustworthy', we have built an efficient, professional and fast service platform to continuously optimize and improve service quality. Our company has been operating for many years, always adhere to serving customers and create benefits and high-quality products for customers.

Thermal transfer ribbon FOR Avery Dennison / Novexx Solutions comes in various forms including wax, wax/resin or resin, depending on your necessity. Its areas of application include storage, shipping, logistics, signs and logos, and direct food contact. It is also applicable for medical stuff such as cosmetics, health, and pharmaceuticals. The longest available ribbon on the market is up to 1400 m long that will help you minimize production down-time. It is the best thermal transfer ribbon that is well suited to your budget.


Thermal Transfer ribbon Resin is specially designed ribbon with excellent resistance. Provide high quality print result with the highest levels of resistance to abrasion, heat 300°C (on polyamide filmm), steam and various chemicals including gasoline, engine oil, bleach, antifreeze, mineral spirits and sulphuric acid. Resin ribbon is offering very good printing quality on wide scale of plastic and textile materials and is possible to choose from wide range already slitted rolls for different types of thermal transfer printers with flat head. We have Resin Ribbon which is suitable for printers with flat head which are for example: Avery Dennison, Zebra, Datamax, Sato, Intermec, Citizen and so on.


Ribbon Type

Characteristics

Substrates

Applications

Avery Compatible Resin Ribbon

Excellent durability

Polyethylene

Shelf Labeling

Excellent versatility

Polyimide films

Product Labeling

Excellent printing image

Polypropylene

RFID

Low printing energy level required

Top coated and print-treated polyester

Logistics

Widely used in variety of substrates

Vinyl

Signage

High speed printing

Nylon

Pharmaceutical

Agency

Automotive

Asset tracking

Electronic component

Security


Images of Avery Dennison Ink Ribbon


Frequently Asked Questions Avery-Dennison Printers

1. My printer has stopped running, and is showing error code 5000 Bus Device Error. How can I fix this problem?

This error indicates that one of the devices attached to the I2C bus (the M4A motor driver board) is not responding. The error needs to be acknowledged by pressing the ONLINE key, after which the following things should be checked:


Determine if any additional error messages follow, and acknowledge them where required. [See Secondary and Tertiary Indicators below.]

Turn the printer off, and allow it to sit idle for at least 30 seconds.

If the error recurs on power up, re-acknowledge any cascading errors as in step 1, then check peripheral device settings under System Parameters. Reset to the proper configuration, and allow the printer to re-initialize.

After re-setting the peripherals or any other menu elements, turn the printer off again. Let the printer sit idle for at least 30 seconds, and then turn it back on. The printer should initialize normally.

NOTE: A persistent bus device error is indicative of either attempting to run the printer with incorrect settings, trying to override sensors, or failure of one of the M4A peripheral device boards.


SECONDARY INDICATORS FOLLOWING BUS DEVICE ERROR

Acknowledgement of the bus device error will generally produce a secondary error—either 5005, 5006, or 5008. These errors indicate that the associated device is not connected to its peripheral board, or may indicate a problem on the board itself. The secondary error must be acknowledged by pressing the ONLINE key. [For further details on these errors, see the specific notes below on errors 5005, 5006, and 5008.]


TERTIARY INDICATORS FOLLOWING BUS DEVICE ERROR

If one of the secondary errors occurs, acknowledgement of it may result in a third error, which will always be in the group 5020-5025. These errors provide more specific information about the source of the original bus device error by indicating the device ID for the particular fault. For a summary of the device ID's, see details on errors 5020 through 5025.


We constantly surpass ourselves, and are committed to continuing to provide manufacturers and customers with leading technology and cost-effective TTR Label Printing Ribbon (YD100). Our forward-looking strategic thinking and cutting-edge perspective have created a new business philosophy that is borderless and frameless for the enterprise. Qualified product quality is our highest pursuit, and user satisfaction with products is our ultimate goal. We sincerely hope for your presence and guidance.
Hot Tags: resin ribbon for avery printer, China, manufacturers, suppliers, factory, customized, price, 05095bk11045, Near Edge Wax Resin Ribbon, free printable labels for jars, tr4085plus, Datamax Wax Resin Ribbon, 03200gs11007

Send Inquiry