Resin Barcode Ribbon is one of the easiest to use and to make your own. There are many kinds of barcode ribbon but what sets it apart from the rest is that it has a very smooth surface and an easy to read surface. It will take any type of bar code and turn it into a nice ribbon. You simply glue it to the barcode with a double sided tape that is adhesive. If you can't find that kind of tape, use some tape that is transparent.
You don't want this to stick out and be shabby or torn in any way, so take time to get it in good shape. Once you have made your ribbon, you need to figure out how to use it. The best way to do that is to cut out the shape you want the ribbon to be and place it on the strip of paper you are going to use. Make sure the ribbon is the same length or slightly longer than the barcode. Then, stick your barcode in the middle of the strip and hold it down while you attach your ribbon around the barcode. Make sure your ribbon is straight and smooth so that it will not slide around while you are working.
Now you need to work with a number of different things. First, you need a scanner, a label set, some ribbon, and possibly some colored marker. You should always start with the most basic items first before adding anything else. The more sophisticated you make the ribbon, the easier it will be to make all the other decorations and then attach them to the ribbon. After you have everything together, make sure you test it to make sure you have the ribbon laying the way you want it to and that you have the scanner set up correctly.