① Which copiers are used
Under the thermal transfer machine copying method, the wax-based ribbon and the sticker are consumed in the same length and length. In terms of overall width, the total width of the ribbon should be greater than the total width of the sticker. Lower than the total copy width of the copier. Because the physical specifications of each copier are different, the length of the paper roll that can be loaded and the total width that can be copied are also different. In addition, the combination of the operating temperature of the printer nozzle and the sensitivity characteristics of the ribbon will also cause considerable harm to the actual effect of copying.
② On which surface layer
Generally speaking, the surface of copperplate paper is not smooth, and it should be matched with wax-based or mixed-based carbon ribbon applications; while the surface of PET paper is relatively smooth, it should be matched with epoxy-based carbon ribbon applications.
③Expected performance performance
If it is expected that the copied content of the logo has good performance, the epoxy-based carbon ribbon should be selected.
Generally speaking, the cost of wax-based carbon ribbon is lower, the cost of mixed-based carbon ribbon is second, and the cost of epoxy-based carbon ribbon is higher.
⑤Scratch resistance, scratch resistance, scratch resistance, corrosion resistance, heat resistance, etc. of the logo
If the mark will be often rubbed on the scratch resistance, scratch resistance, corrosion resistance, heat resistance, the mark must have extremely strong scratch resistance, at this time, epoxy resin ribbon or mixed carbon ribbon should also be selected .
⑥ At what rate to copy
In the case of high-speed copying, the ribbon with improved sensitivity should be selected.